| |
|
| HPS Products |
 |
 |
| Distribution Class Arresters,
Suspension Insulators,
Station Class Arresters,
Post Insulators |
 |
Hot line ans Stirrup Connections |
 |
Composite Tiles,
Fittings,
Connectors,
Automatic Splies,
Dampers & Tolls |
| |
|
| Instrument Transformers |
 |
| Current Limiting Fuse |
 |
| Capacitors Cells and Banks |
 |
| Control & Relay and Energy Multi-Meters |
 |
| Breakers, Contactors and Soft starters |
 |
| Relays, Controller and Analyzer |
 |
| Termination and Earthing Kit |
 |
| VICTORY SERIES (LOOSE CONTROLLERS) |
|
|
• DIRECT ON LINE:
1. REVERSING STARTER
2. NON REVERSING STARTER
• REDUCE VOLTAGE WYE DELTA STARTER
• AUTOTRANS
STANDARD TECHNICAL SPECS
Rated voltage: 110V / 240V / 480Vac
Available in following standard design starters:
Direct on line: Full Voltage reversing and full voltage non reversing
Reduce voltage: Wye-Delta, Auto trans and part winding
Control voltage: 240V / 110Vac
Special starters (Soft starter / VFD) are also available. Just consult Asiaphil - Sales Department
Degree of protection: IP-40. Consult Asiaphil office for the following: Front arrangement and special enclosures
Cover mounting: Hinge type with quarter turn door locks
Steel thickness: 1.5mm
Powder painted through a 9 stage phosphate washing vessel (Chemically treated and cleaned). Standard color of wrinkle beige and AMII Gray
|
| THERMOWELD PRODUCTS |
|
Thermoweld Quality
Weld copper to copper or copper to steel
No outside power is required,
uses thermoweld exothermic process
(high temperature reaction of powdered copper oxide
and aluminium)
Control voltage: 240V / 110Vac
Special starters (Soft starter / VFD) are also available. Just consult Asiaphil - Sales Department
Reaction takes place in a semi-
permanent graphite mold
(mold last for about fifty or more welds with proper care)
Requires very little time or skill to
obtain an efficient, maintenance free
connection
Thermoweld is a molecular weld and ensures the following:
Connections will not be affected by a high
current surge. Test have shown that the
electrical conductor will melt before the
thermoweld connection when subjected to
high short circuit current. Consult to IEEE Std 837.
Connections will not loosen or corrode at
the point of weld. There are no contact
surfaces or mechanical pressures involved.
A thermoweld connection becomes an integral
part of the conductor.
Connections have a current-carrying capacity
equal to or greater than that of the conductors.
Selector Chart (Mouseover to Enlarge Image)
|
 |
 |
| CIRCUTOR PRODUCTS |
|
| |
 |
| |
 |
| |
 |
| |
